Payments
Products
Shop
Martcom
Contact us
Giorgio
Romario
Nadun
Lorenzo
Email: sales@martcom.eu
Phone: +39 02 8995 9889
Allen & Heath DT164-W Dante audio expander with 4 XLR outputs for ACE Backstage 174SLBK
We adhere to the OSS system and the VAT amount is calculated per individual country of destination of the goods. The exact value will be calculated at checkout.
Aderiamo al sistema OSS e l'importo IVA è calcolato per singolo paese di destinazione della merce. Il valore preciso verrà calcolato in fase di checkout.
[you_save]
In Stock
Generally shipped within 2-3 weeks
The Allen & Heath DT164-W Dante audio expander with 4 XLR outputs for ACE Backstage 174SLBK is a portable remote audio rack for a digital mixing system.
SECURE CHECK OUT
Similar products or new versions
In Stock
Specifications
The Allen & Heath DT164-W Dante audio expander with 4 XLR outputs for ACE Backstage 174SLBK is a portable remote audio rack for a digital mixing system. The Allen DT audio expander remote provides 8 XLR inputs and 4 XLR outputs and must be wired to add additional inputs and outputs. The XLR sockets must be of the same or higher quality and specification as those on the digital mixing system and must appear in the digital mixing system’s soft patch for channel assignment. The Allen DT audio expander’s audio connection is via Cat5 cable using Allen & Heath’s dSNAKE Ethernet protocol, which allows the audio rack to be located up to 100 m away from the mixer or audio rack. The Ethernet protocol provides remote preamplifier control and all microphone preamplifiers are retrievable from the digital mixing system. The unit’s firmware is automatically updated when it is connected to the digital mixing system. The local Ethernet port is an RJ45 socket with EtherCon locking ring. It is also possible to connect the remote audio rack to a main AudioRack unit to add another 8 XLR inputs and 4 XLR outputs from that location. This connection is via an ‘Expander’ connection and is also an RJ45 socket with EtherCon locking ring. The Allen & Heath DT164-W Dante is compatible with Allen&Heath digital mixers. The Allen DT audio expander is a rugged, rack-mountable 19″ steel chassis with a height of 1U. It also features a built-in power supply that accepts AC mains voltages of 100~240V, 50/60 Hz, 20W max via a 3-pin grounded IEC male connector mounted on the rear of the chassis. A switch is provided near the mains input to isolate the mixer from the incoming power supply. The recommended operating temperature for the Allen DT164-W is between 5 and 35 degrees Celsius.
| Weight | 3,2 Kg |
| Dimensions | 21 x 8,7 x 21 cm |
| Input | XLR inputs: balanced, +48V phantom power Microphone/line preamplifier: fully recallable Input sensitivity: -60 to +15dBu Analogue Gain: +5 to +60 dB, in 1 dB increments Pad: -20dB active PAD Maximum input level: +30dBu (PAD in) Input Impedance: >4kΩ (Pad out), >10kΩ (Pad in) Mic EIN: 127dB with 150Ω source |
| Output | XLR Outputs: Balanced, relay protected Output impedance: <75Ω Nominal output: +4dBu = 0dB meter reading Maximum output level: +22dBu Residual output noise: -92dBu (muted, 20-20kHz), -90dBu (muted, 20-40kHz) |
| Dante | Sampling frequency: 48kHz or 96kHz Bit depth: 24 Bit Gain, Pad, 48v Control: Allen & Heath dLive, Avantis, AHM-64 or SQ system |
| Operating Temperature | 0°C to 40°C |
| Energy consumption | 40W max |
| Power supply | 100-240V, 50/60 Hz, 20W max |
| Compatibility | SQ, Qu, Avantis, AHM-64, GLD |
Often bought together
€ 102,00 € 124,44 tax incl.
€ 68,00 € 82,96 tax incl.
Frequently bought together
In Stock
In Stock
