Allen & Heath DT168 portable audio expander
€ 1.849,00 € 2.255,78 vat incl. € 1.756,55 € 2.142,99 vat incl.
In Stock
Allen & Heath DT168 portable audio expander is a portable remote audio device for Dante-enabled Allen & Heath mixing systems.
Allen & Heath DT168 portable audio expander is a portable remote audio device for Dante-enabled Allen & Heath mixing systems. The remote audio unit provides 16 XLR inputs with phantom power and 8 XLR outputs. Phantom power LED indicators are provided for each input jack on the remote audio rack. The unit can provide 48kHz or 96kHz sampling rate over a Dante network. Two Ethercon connectors are provided to carry digital audio and control signals over Dante. The unit operates in “redundant” or “switched” mode via software. In “redundant” mode, the unit provides a fully redundant connection to any Dante device. In “switched” mode, the unit allows daisy chained connection of multiple units. The unit is equipped with a hardware “Network Reset” switch . The Ethernet protocol provides control to the remote preamplifier, and all microphone preamplifiers are callable from the mixing system.
The remote audio unit has a sturdy steel frame and is designed to be transportable and to be placed horizontally or vertically on the stage or in the performance environment. A carrying handle is provided to make it easy to lift the unit when moving. The remote audio unit has a built-in power supply that accepts AC mains voltages of 100~240V, 50/60 Hz, 40W through a 3-pin grounded IEC male connector mounted on the rear chassis. The recommended operating temperature for the remote audio unit is between 0° and 40°.
| Weight | 4,75 kg |
| Dimensions | 39,9 x 18,9 x 18,2 cm |
| Input | XLR Mic/Line input: XLR balanced, +48V phantom power supply Microphone/line preamplifier: Fully recallable Input sensitivity: -60 to +15dBu Analog gain: +5 to +60 dB, in 1 dB increments Pad: -20dB active pad Maximum input level: +30dBu (PAD in) Input impedance: >4kΩ (Pad out), >10kΩ (Pad in) Microphone EIN: -127dB with 150Ω source Phantom power indication: Per jack, detection of internal or external phantom power, switched to +24V |
| Output | Analog XLR outputs: Balanced, relay protected Output impedance: <75Ω Nominal output: +4dBu = 0dB meter reading Maximum output level: +22dBu Residual output noise: -92dBu (quiet, 20-20kHz) -90dBu (quiet, 20-40kHz) |
| System | Balanced measurement from XLR In to XLR Out, 20-20kHz, minimum gain, pad out Dynamic range: 110dB System signal to noise: -92dB Frequency response: 20Hz – 30kHz (+0/-0.8dB) THD+N (input to analog output): 0.0015% to +16dBu output, 1kHz 0dB gain Headroom: +18dB Internal operating level: 0dBu dBFS alignment: +18dBu = 0dBFS (+22dBu at XLR output) Meter peak indication: -3dBFS (+19dBu at XLR output) Sampling frequency: 96kHz |
| Mains Power | 100-240V AC, 47-63Hz, 300W max |
| Channels | Input: 16 Output: 8 |
Often bought together
Spesso comprati insieme
In Stock
Digital audio mixer Allen & Heath SQ-5 48-channel
In Stock
