Allen & Heath AHM-16 16×16 channels digital matrix processor
€ 999,00 € 1.218,78 vat incl.
We adhere to the OSS system and the VAT amount is calculated for each country of destination of the goods. The precise value must be calculated during the checkout phase.
In Stock
Shipped within 10-14 days
The Allen & Heath AHM-16 16×16 channels is a digital matrix processor for sound management and installation.
Related videos
Specifications
The Allen & Heath AHM-16 16×16 channels digital matrix processor is an audio matrix processor for sound management and installation. It is designed for audio distribution, paging, conferencing, and speaker processing in a multitude of environments, including corporate, hospitality, education, event and multifunctional venues, retail, theaters, cruise ships, and sports facilities. The AHM-16 processor is complemented by an extensive ecosystem of remote audio expanders, remote controllers, interfaces, applications and software. A family of portable, rack-mountable or wall-mounted audio expanders is available with a choice of transport protocols, and there is also a range of IP remote controllers for volume control, music source selection, preset recall, and more. AHM can also integrate with third-party devices via GPIO, TCP/IP or industry-standard control systems. Allen & Heath’s Custom Control editor and application offer additional control options and custom user interfaces for multiple users and device types, with kiosk and BYOD capabilities. The processor can handle 16 input channels and 16 output channels, all independently assigned. The 8-band parametric equalizer will provide selectable Bell, Constant Q, Shelving, LPF, HPF and Notch filter types per band.
Allen & Heath AHM-16 has 8 balanced inputs on pluggable Phoenix terminal blocks. Each input has independent +60 dB gain control, -20 dB active PAD and +48 V phantom. It also has a 128×128 I/O port for optional digital interface modules. An optional Dante module provides a minimum of 32×32 I/O at 96kHz and be compatible with AES67 and Dante Domain Manager. Also available is an optional SLink module for Ethernet audio expansion, which supports various Audio-over-Ethernet protocols and provides access to a maximum of 128×128 I/O. The unit is capable of saving 500 presets. In addition, a cross-fade of up to 20 seconds duration is available to be applied to any combination of inputs, zones, groups, input/zone and zone/zone crossover points. The unit shall allow the creation and storage of up to 4 user profiles, each with editable name and password. The unit shall allow the connection of two general-purpose inputs and two general-purpose relay outputs, via Phoenix connectors that can be plugged on the back of the chassis. Each input connector allows analog control of Mute, Levels, preset recall and custom MIDI via a 0-10V control signal. Allen & Heath AHM-16 shall be equipped with a built-in power supply that accepts AC mains voltages of 100-240V, 50/60Hz, 65W max via a 3-pin grounded IEC male connector mounted on the rear chassis.
Allen & Heath AHM-16 has 8 balanced inputs on pluggable Phoenix terminal blocks. Each input has independent +60 dB gain control, -20 dB active PAD and +48 V phantom. It also has a 128×128 I/O port for optional digital interface modules. An optional Dante module provides a minimum of 32×32 I/O at 96kHz and be compatible with AES67 and Dante Domain Manager. Also available is an optional SLink module for Ethernet audio expansion, which supports various Audio-over-Ethernet protocols and provides access to a maximum of 128×128 I/O. The unit is capable of saving 500 presets. In addition, a cross-fade of up to 20 seconds duration is available to be applied to any combination of inputs, zones, groups, input/zone and zone/zone crossover points. The unit shall allow the creation and storage of up to 4 user profiles, each with editable name and password. The unit shall allow the connection of two general-purpose inputs and two general-purpose relay outputs, via Phoenix connectors that can be plugged on the back of the chassis. Each input connector allows analog control of Mute, Levels, preset recall and custom MIDI via a 0-10V control signal. Allen & Heath AHM-16 shall be equipped with a built-in power supply that accepts AC mains voltages of 100-240V, 50/60Hz, 65W max via a 3-pin grounded IEC male connector mounted on the rear chassis.
| Weight | 3,8 kg |
| Dimensions | 48,3 x 27,0 x 4,4 cm |
| Input | Mic/Line inputs: Balanced, +48V phantom power Microphone/line preamplifier: Fully recallable Input sensitivity: -60 to +15dBu Analogue Gain: +5 to +60dB, 1dB steps Pad: -20dB active PAD Maximum input level: +30dBu (PAD active) Input Impedance: >3kΩ (Pad out), >8kΩ (Pad in) Mic EIN: -127dB with 150Ω source |
| Output | Analogue outputs: balanced, relay protected Output impedance: <75Ω Nominal output: +4dBu = 0dB meter reading Maximum output level: +21dBu Residual output noise: -92dBu (quiet, 22-22kHz) |
| System | Balanced XLR in to XLR out, 20-20kHz, +5dB Gain, Pad out, 0 dB signal (meter) Dynamic range: 108dB Signal to system noise: -92dB Frequency Response: 20Hz – 20kHz +0/-0.5dB THD+N (analogue input to output): 0.005% to +16dBu output, 1kHz Gain of +5dB Headroom: +18dB Sampling Frequency: 96kHz +/- 20 PPM Acoustic noise: Typical load, 22 degree C environment No I/O port or AEC installed: 31dBA With I/O port and AEC installed: 33dBA |
| Input processing | 16 input channels: Configurable mono or stereo Trim: +/-24 dB digital trim Polarity: Normal/Reverse Stereo Amplitude Control: L/R, R/L, L -Pol/R, R -Pol/L, Mono, L/L, R,R, M/S Sidechain: Selectable with auto-key or source, with Lo-Pass and Hi-Pass at 12 dB/octave Threshold: -72dBu to +12dBu Depth: 0 to 60 dB Attack: 50us to 300ms Hold: 10ms to 5s Release: 10ms to 1s Insert: In/Out, level +4dBu/-10dBV PEQ type: 8 fully parametric bands, +/-15dB Band 1 – 8: Shelving LF/HF selectable, Bell (variable or constant Q), Hi-Pass / Lo-Pass Bell width: 0.50 – 6.00 Q Rack type: Classic Baxandall Filter Hi-Pass, Lo-Pass: 12 dB/octave Compressor: Peak or RMS sensing Side chain: Selectable with auto-key or source, with Lo-Pass and Hi-Pass at 12 dB/octave Threshold: -46dBu to 18dBu Compressor parameters: Threshold, ratio, attack, release Delay: Up to 683 ms |
| Zone processing | Up to 16 zones: Configurable mono or stereo Source selector: Up to 20 sources, fade-in/out level time <20s Insert: In/Out, +4dBu/-10dBV level GEQ: 28 bands 31Hz -16kHz, +/-12dB, constant-Q PEQ: See Input Processing Compressor: See Input Processing Delay: Up to 683 ms Ambient Level: Source and measurement point selectable, Differential Gain -18 dB to 40 dB Gap: Source and measurement point selectable, Threshold -62dB to -20dB, Time 0-5000 ms Gain Element: Minimum/Maximum Gain, Speed 0-30dB/s Limiter: Threshold, Attack and Release selectable, Release |
| Speaker processing | Crossover: Configurable 2, 3, 4-way Filters: Asymmetrical, 1st order selectable, Butterworth 12/18/24 dB/octave, LR 12/24 dB/octave EQ: 4 fully parametric bands or 28 GEQ bands Delay: Up to 683 ms Limiter: See Zone Processing |
| Channels | 16 |
| Mode | D-Classic gain sharing or NOM |
| Power supply | 100-240V AC, 50-60Hz, 65W max |
| Compatibility | Allen & Heath IP1, IP6, IP8 remote control |
Often bought together
€ 1.449,00 € 1.767,78 vat incl.
Spesso comprati insieme
In Stock
